Compact Finger Jointer CFC25/30
Equipment Introduction

Huge advantages to traditional finger jointing line.

• Full automatic production: finger shaping/glue application/pressing and length cutting programed without any manual operation

• Even slightly curved or twisted long sawn timber material could be finger jointed,no pre-planning and short cutting necessary-time and timber saving

• Max.work piece cross-section: 250x70mm or 300x150mm

• Up to 4 manpower could be saved, 80% less production space and up to 60% glue (PUR glue) saving

If you are interested in our products, please feel free to contact us

Parameters
Type CFC25 CFC30
1.Processing Parameters
1.1.Length of infeed timber ≥ 1,300 mm ≥ 1,300 mm
1.2.Thickness range of infeed timber min 20 mm, max75 mm min 25 mm, max 160 mm
1.3.Width range of infeed timber min 75 mm, max 250 mm min 80 mm, max 300 mm
1.4.Outfeed length of timber According to customer’s requirements According to customer’s requirements
2. Equipment parameters
2.1.Finger length Standard 15mm,Optional for 20mm Standard 15mm, Optional for 20mm
2.2.Processing speed Up to 3-4 cycles/min Up to 3-4 cycles/min
2.3.Diameter of cut-off saw 450 mm 600 mm
2.4.System air pressure 0.6-0.8MPa 0.6-0.8MPa
2.5.Air consumption 150 L/Min 150 L/Min
2.6.Glue type PUR (one component) PUR (one component)
2.7.Motor power 74 kW 94 kW
2.8.Diameter of dust extraction port φ225+2xφ125 mm φ225+2xφ125 mm
2.9.Weight of equipment 10 T 15 T
2.10.Overall Dimension (L x W x H) 4,100 x 3,500 x 2,640 mm 4,500 x 3,500 x 2,640 mm