High Speed Compact Finger Jointer
Equipment Introduction

Servo controlled “flying saw” is running independent to the finger shaping. "Fly back" route of finger shaper avoids waiting time.The performance of finger jointing is therefore increased significant.

• Servo driven infeed and outfeed speed up to 180m/min.

• Powerful finger shaper supported with hydraulic out-board bearing

• Capacity increased up to 7-8 cycle/min.

• Max.work piece cross-section:250x50 mm,more running meters for long ingoing length.

• Glue applicator for any kind of glue available

If you are interested in our products, please feel free to contact us

Parameters
Type CFC25S
1.Processing Parameters
1.1.Length of infeed timber ≥ 1,300 mm
1.2.Thickness range of infeed timber min 25 mm, max 60 mm
1.3.Width range of infeed timber min 80 mm, max 250 mm
1.4.Outfeed length of timber ≥6,000 mm
2. Technical Parameters
2.1.Finger length Standard 15mm, Optional for 20mm
2.2.Processing speed Up to 7-8 cycles/min
2.3.Diameter of cut-off saw 350 mm
2.4.System air pressure 0.6-0.8MPa
2.5.Air consumption 150 L/Min
2.6.Glue type PUR (one component)
2.7.Motor power 82 kW
2.8.Diameter of dust extraction port φ225x2+φ125 mm
2.9.Weight of equipment 10 T
2.10.Overall Dimension (L x W x H) 8,430 x 4,000 x 2,550 mm