Turn Table Finger Joint Line
Equipment Introduction

Work pieces in package will be finger shaped by turn table shaper. In laying position will be glue applicated for PUR glue.

• Full automatic operation saves manpower

• Double spindle shaping for high efficiency and long tooling lifetime

• Max.shaping height up to 250mm

• Table width 800mm,performance 1.2 package/min

• For short pieces after defects cutting,ingoing length 450-2,500 mm

• Front-end press or endless press could be chosen for short or long lamella

If you are interested in our products, please feel free to contact us

Parameters
Type FSZ80
Working height 950 mm
Width of shaper table 800 mm
Infeed height of timber 20-250 mm
Infeed length of timber 450-2500 mm
Finger length Standard 15mm, Optional for 20mm
Capacity 1.2 cycles/min
System air pressure 0.6-0.8MPa
Air consumption 150 L/Min
Glue type PUR (one component)
Motor power 88 kW
Diameter of dust extraction port 3xφ160 mm
Dimension (L x W x H) 12,400 x 6,300 x 2,300 mm

 

 

It can be matched with endless length finger joint machine FPC450

 

 

Type FPC450
Length of infeed timber Min 400 mm
Thickness range of infeed timber Min 25mm, Max 70mm
Width range of infeed timber Min 45 mm, Max 250mm
Outfeed length of timber According to customer’s requirements
Height of workbench 900 mm
Air pressure 0.6-0.8MPa
Pressed air consumption 400NL/min
Dust extraction port 100*2
Motor power 21kW
Overall Dimension (L x W x H) 17,200x1,260x1,600mm